Our Range of Acid and Non Acid Rust Removers


Rustbuster manufacture both acid and non acid rust removers to suit your needs and circumstances, if you have any doubts what so ever about which chemicals you can use safely on your project please contact Rustbuster Before ordering. If you are wearing the correct personal protection equipment (PPE) they are all perfectly safe to use.

The Pro's and Cons. Acid or Non acid ?

Acid based products tend to show imediate results when removing rust but extra care is required in both the handling and use of them. Ideal when the product cannot be dipped. Can cause damage to the substrate if left too long

Phos-Kleen A Rust Remover

A fast acting rust remover that contains a blend of both Hydrochloric and Phosphoric acid. Hazardous Chemical.

Phos-Kleen B Rust Remover and Phosphating Solution

A 100% Virgin Ortho Phosphoric acid with a blend of cleaning soaps that will both degrease and remove surface rust, when left to dry on the cleaned steel it will leave a blue grey Phosphated surface that can be overpainted. Hazardous chemical.

Ph Neutral products still require as much care during application as the acid products but do not require dipping.

Purple-X Rust Stain Remover

A new generation Ph neutral rust remover that will remove rust staining without damaging existing paint or varnish, from Chrome wire wheel etc, Boats Marine GRP, Caravans and Motorhomes, Rail way carriages, Trams and buses, Concrete rust staining and any other area where unsightly rust stains need to be removed. Can also be used on aluminium. Hazardous chemical.

Non Acid Rust removers tend to work a lot slower than acid based products but the product will eventually return you a pristine example of what the product is like under the rust.

Safer Rust Remover

A completely acid free dipping solution for rust removal. Supplied in a concentrate to add to a dip tank. Safe to use on items of historic importance. Minimum safety hazard.

Fe-123 Rust Converter

Is a rust converter applied to surface rust pitting and into seams and crevices after the steel has been wire brush cleaned, ready to paint in two hours. Ideal when the product cannot be dipped. Minimum safety hazard.

Surface steel to be treated should be free of contamination grease and loose heavy layered rust before using any of the rust treatments. This will allow the products to both perform better and last longer.




Contact Us

Contact Rust

Rustbuster Ltd
Welland House
Cradge Bank
South Linconshire
PE11 3AN

01775 761 222


Social Media

Rustbuster is a registered trade mark of Rustbuster Ltd, registered in the UK Trademark number 2211446 Class 02 & 37.
Any unlawful use of the Rustbuster name or logo or passing off will result in legal proceedings. Rustbuster Ltd UK registerered 3639350.