ARMAWELD – Weld-Thru Primer Reddish Brown

Armaweld is a two-pack, fast-drying zinc silicate weld-through primer designed to provide superior anti-corrosion protection during fabrication. Perfect for MIG, TIG, and MAG/G-FCAW welding, Armaweld improves weld penetration while reducing burn-back on fresh steel.

🔧 Key Features:

• ✅ Fully weldable & cuttable zinc silicate primer

• 🎯 Fast drying – touch dry in ~5 minutes at 20°C

• 🛡️ Anti-corrosion protection for steel fabrications

• 🔥 Low fume emission during welding

• 🖌️ Can be sprayed or brushed on

• ⚙️ Ideal for inside sill repairs, frame work & complex builds

🔩 Weld-Thru Performance You Can Trust

When welding new steel to steel coated with Armaweld, you’ll benefit from:

• Improved weld penetration

• Minimal burn-back

• Safer welding with no harmful fume release

Whether you’re doing automotive restoration, structural fabrication, or panel builds, Armaweld helps you prime as you build.

🧱 Perfect for Internal Fabrication

Use Armaweld where you can’t return later to apply protection — such as when welding inner sills before fitting outer panels. Coat weld zones first, then weld cleanly through the primer. Finish with cavity wax after fabrication for complete protection.

🧼 Surface Prep & Application Tips

Best results come from good prep:

• Prep steel to St3 standard (wire brushes, abrasive wheels)

• Or blast to a higher standard

• Compatible with Rustbuster Phos-Kleen B for rust removal and phosphating

Mix Ratio:
2:3 by volume — 2 parts Component A (grey colour) to 3 parts Component B (activator). Supplied as a complete two-pack kit.