INDUSTRIAL DEGREASER, CLEANER AND PRE PAINT PREPARATION SOLUTION

SP10 is a very powerful caustic detergent. It can be used neat to remove high concentrations of grease or carbon stains. In addition, as it's a super strength solution, it can be diluted with water (see below). SP10 contains an anti-rust additive to prevent flash rusting on clean steel.

• SP10 will remove grease, dirt and carbonised grime.
• Can be diluted in a 1:4 ratio for general cleaning (1-part SP10 with 4 parts fresh water).
• Can be diluted up to 1:100 when used neat in a power wash ratio dispenser. Pour neat SP10 into the detergent tank and set the dial to 1:100.
• When applying by brush, allow SP10 to foam on scrubbing as this will allow the SP10 to emulsify the grease and dirt. When clean, wash all SP10 residue away with fresh water or Rustbuster Chlor-X Salt Remover.

Substrates/items SP10 can be used on: steel, engines, farm equipment and plant, concrete floors, tiles, plastic and GRP. (Do not use on painted surfaces.)

PLEASE NOTE:

Do not use SP10 on paint work as caustic staining may occur.

Do not allow SP10 to dry on aluminium as white staining may occur.