CORROLAN PENETRATOR RUSTPROOFING PRIMER WAX
Corrolan Penetrator is a ready-to-apply rustproofing wax that acts as a primer before the application of Corrolan Pure underbody wax and Corrolan Active cavity wax. Its reduced viscosity ensures excellent penetration into threaded components, seams, fine crevices and interfaces.
- Natural, non-toxic, bio-degradable and sustainable product manufactured from the lanolin found in sheep’s wool.
- Resistant to salt, the chief enemy in the fight against rust.
- Strong self-healing barrier that hermetically seals, so air cannot reach the metal – and will not flake, peel or crack.
- Non-flammable, so it’s safe to store and transport.
Corrolan Penetrator can also be used as a general maintenance penetration fluid, lubricating fine parts and keeping them free from corrosion.
|Product description||Honey coloured lanolin-based penetrator/primer wax and maintenance fluid.|
|Pack description||Available as a 400ml aerosol, 500ml or 1ltr oil spout bottle, 1ltr Schutz can, or in containers of 5ltr, 25ltr, 60ltr or 200ltr.|
|Application temperature||Can be applied to steel as low as -5c. The steel must be at least 3 degrees above the current dew point. (See our dew point calculator.)|
|Application||Apply by Rustbuster’s Pro Wax Injection Gun, Lemmer HD460, Schutz gun or equivalent application equipment. Also available in aerosol and oil spout bottles. Can also be applied with a brush.
Heating Corrolan Penetrator is recommended to naturally lower the viscosity of the product.
Corrolan Penetrator can be thinned with Corrolan Turbo if required.
|Cleaning||Clean up with Corrolan Turbo.|
|Safety||All Corrolan products are safe to use and non-hazardous, however, we always recommend using in a well-ventilated atmosphere, wearing a respirator face mask when spraying or brushing in an enclosed space.
Wear suitable protective clothing, gloves and eye protection.
|Material Safety data Sheet||Click Here|
|Technical Data Sheet||Click Here|