RUSTY'S TOP TIPS - UNDERSTANDING RUST - WHAT IS CORROSION




More Images



RUSTY'S TOP TIPS - UNDERSTANDING RUST - WHAT IS CORROSION £0.00 ex VAT


Free Delivery

On orders over £80.00+VAT, up to 20Kg.



Need Assistance?

For more product information or have general question, please contact us.


Already Purchased This Product? Leave a Review

Share This Product



Product Information


Understanding Rust - What is Rust Corrosion

We will endeavour to explain the rusting process in terms we can all understand, I do hope our simplicity does not cause any offence to any qualified metalurgists reading this page, this is our practical take on the subject.

Rust is the product we get when iron goes through the corrosion process. Iron and steel are not found free in nature. Both are extracted from iron ore in a blast furnace or electro oven.

Large amounts of energy are introduced into the iron ore in the extraction process, when this stored up energy is released, the iron has a tendency to corrode back to its natural form "iron oxide" or RUST. Metals that are found free in nature are stable and are classified as being more noble but even metals found in nature have varying electrical potential.

Gold has a potential of 1.498 v whereas Antimony has a potential of only 0.152v once we add man made metals and Alloys to this a very basic scale of a metals nobility would look some thing like this.

 

/images/BROCHE.JPG

 

This Saxon gold brooche (above) is over a thousand years old with no signs of corrosion Gold is found free in nature you can pan for it in a river in Australia you can literally pick it up from the ground, a completely natural and stable metal its free!

The Iron Hammer Axe ia also over 1000 years old, Iron is not found free in nature therefore as soon as it is exposed to natures Air and Water it corrodes and disintegrates back to the very earth it came from.

Iron and steel require a barrier surface protection on all surfaces to stop the natural corrosion process. Hence we can say Gold is more noble( stable) than Iron/Steel.

 

Automotive Metals Nobility Table

  1. GOLD THE MOST NOBLE
  2. TITANIUM
  3. HIGH GRADE STAINLESS STEEL
  4. BRONZE
  5. 50/50 LEAD TIN SOLDER
  6. COPPER
  7. LOW GRADE STAINLESS STEEL
  8. STEEL & CAST IRON
  9. ALUMINIUM
  10. ZINC
  11. MAGNESIUM

Gold being the most NOBLE / CATHODIC  Magnesium being the least NOBLE most ANODIC The less noble metal will be consumed by the more noble metal when they are connected by an electrolyte (water). For example sacrificial anodes used on steel hulled ships and yachts are made of zinc. The zinc ingots are fixed below the water line, when a section of  steel becomes exposed to the water there will be an electrical exchange between the bare steel and the Zinc anodes, because the zinc being less nobel than the steel will be sacrificed to corrosion the steel will stay in tact, this is known as cathodic protection. Eventually the zinc anode will be consumed but the steel will not.

There are other less known metals and alloys within this scale but for the sake of clarity these have been omitted.

WARNING ; Due to this natural cathodic corrosion process you will need to think very carefully how you join an interface of for example steel and aluminium. The best known example of this is the classic shape Land Rover Defender where the door skin is aluminium and the door frame is steel. You get white salts appear on the aluminium destroying the paint finish, the white powder is in fact a white rust. If this is not treated quickly the aluminium will be sacrificed to the steel in cathodic reaction and holes will appear in the door skin. The use of modern panel adhesives that sit between the two metals would have stopped this from happening. The further use of plastic sheaths on the pop rivets would have further reduced the contact. This kind of corrosion has been avoidable for many years, a question for the automotive industry maybe.

 

STEEL IS A CHARGED BATTERY

The energy trapped in all iron and steel can be compared to a charged battery, it has both anodic + and cathodic - particles within its structure. Iron and steel can set free their accumulated energy in the form of electricity as soon as moisture is present, in the same manner as an electric torch battery when connected to an electric light bulb. When the battery runs down the zinc capsule around the battery is consumed and the liquid electrolyte runs out. Exactly the same thing happens to a piece of steel. Some areas of the steel are consumed or corroded during the release of energy - THE STEEL RUSTS Some areas of steel can be more Cathodic than others and this is particularly the case of corrosion forming within seams and crevices. Correct design and restoration methods can prevent this. Rustbuster have a completely integrated range of products that can ensure corrosion free engineering, from construction through to restoration and routine maintenance. At Rustbuster we look at a molecular level at how our products can attach themselves to these ions to either reduce or shut down the corrosion process.

 

CORROSION PROTECTION METHODS

THE BARRIER PRINCIPLE

The substrate is isolated from the corrosion causing environment by using a coating which has low permeability to moisture and air. This may be achieved by applying a thick coat of paint or applying a paint having low permeability eg. Epoxy, Polyurethane; or even better applying a thick, low pemeability coating. Rustbuster products that fall into this catagory would be Epoxy Mastic 121, for vehicle cavities this would be the Corrolan product.

PASSIVATION

Corrosion is retarded or arrested by chemical reactions between rust inhibitive pigments in the coating, and the substrate and/or moisture passing through the paint film. The Rustbuster product that would fall within this catagory will be fe-123 Molecular rust converter

CATHODIC PROTECTION

This is achieved by coating the substrate with a paint containing mettalic pigments- usually zinc (Aluminium in some cases), which are ignoble with respect to the substrate. Cathodic protection may also be achieved by means of metal coatings such as zinc galvanising. The rust buster products that fall into this catagory are Zinc Rich Epoxy-Anode (Zinc) and Epoxy -Mastic 121 (Aluminium In order to work effectively the zinc particles must be held in close contact with themselves and the substrate usually a minimum ST3 cleaned surface or blast cleaned for good electrical contact. When a zinc layer is subject to minor damage eg. a scratch, a corrosion rection will take place which produces zinc salts that self-seal the damaged area. See our surface preparation information page ( click number 3 to your left)


Payment - Safe and Secure



PayPal Logo

You don't need to have a PayPal account to check out.

Simply select to your Credit/Debit and make payment with your card as normal.


Share This Product



GET THE LATEST NEWS AND OFFERS




Information


Blog

Contact Us

Sitemap

Contact Rust


Rustbuster Ltd
Welland House
Cradge Bank
Spalding
South Linconshire
England
PE11 3AN

01775 761 222

sales@rust.co.uk

Social Media



Rustbuster is a registered trade mark of Rustbuster Ltd, registered in the UK Trademark number 2211446 Class 02 & 37.
Any unlawful use of the Rustbuster name or logo or passing off will result in legal proceedings. Rustbuster Ltd UK registerered 3639350.