Rustbuster Custom 421 Epoxy Body Primer

Professional body shops are able to prepare, prime and finish in a controlled environment. When working in anything other than the perfect environment, atmospheric conditions and your primer's ability to cope with them is vitally important. Easy sand body shop primers are porous and if not painted in a controlled environment within a specified period of time, will absorb moisture, this leads to corrosion.

For perfect results when restoring body work in a non-body shop environment you need the added protection of Rustbuster Custom Epoxy 421.

• Non-porous pure Epoxy primer
• Can be left exposed during the restoration without absorbing moisture.
• Reduced risk of micro-blisters and corrosion

Rustbuster Custom Epoxy 421 is the perfect base for priming

• Steel
• Aluminium
• >GRP
• Custom Epoxy 421 can be painted with either single pack cellulose or two pack finishes after a light sanding with a P320 abrasive
• Custom Epoxy 421 is supplied in a 800ml comp A pack, a 200ml comp B pack, and 250 ml of Epoxy thinners, this is enough to coat 10 square metres (10 m2 ). Custom Epoxy 421 is available in Grey or Red. Body fillers can be applied before and after application of Custom 421.

For more Technical Application data go to the Custom Epoxy tab 6b under the information bar

CUSTOM EPOXY 421 DOES NOT CONTAIN HARMFUL ISOCYANATES BUT DOES REQUIRE THE USE OF AN A2 - P2/3 RESPIRATOR MASK WHEN SPRAYING.

SEE OUR SAFETY WEAR PAGE

For complete restorations and coating systems using this product click here