RUSTBUSTER CHASSIS RESTORATION VALUE PACK - PURE WHITE RAL 9010
|RUSTBUSTER CHASSIS RESTORATION VALUE PACK - PURE WHITE RAL 9010||£75.00 ex VAT|
|CHASSIS RESTORATION VALUE PACK||£75.00 ex VAT|
|CHASSIS RESTORATION VALUE PACK + LVLP GRAVITY SPRAY GUN KIT, 1.3MM & 1.8MM SET UPS||£120.00 ex VAT|
Enough to coat up to 10m2 of steel at a thickness of over 125um that's twice as thick as competitors chassis coatings, will resist rust and stone chipping. Now available in 12 colours. Select colour from the drop down menu under the product basket before checking out. Non selected colours will be delivered in the default black. See PDF colour card at the bottom of the page.
New option you can now add a quality 2.mm Gravity spray gun for only £25 (+ vat) extra.
Contents and product description.
Spray this solution direct from the trigger spray bottle onto the area to be treated PRIOR to using the SP10 Cleaner
Chlor-X will lift residual surface salts and allow them to be completely removed. Apply to the steel leave for 5-10 minutes and then wash down with the SP10 Pre paint prep.
Extra strong concentrated caustic detergent, can be used neat or diluted 4 parts water to one part SP10.
De greases metal leaving a ready to paint surface.
Contains an anti rusting agent.
Use with a strong bristle brush working into the steel before washing off.
You now have a grease free surface ready to wire brush clean.
This Rust converter stabiliser can be applied direct to steel that either still has rust present or previously rusted steel that you have wire brushed clean but still contains rust pitting. This product does not require neutralising.
High build chassis restoration Epoxy coating.
Use as a primer finish, can be applied over Fe-123 or direct to the steel.
Forms a high build super barrier against further rust and corrosion.
Easy 2k 1:1 mix ratio.
Apply by brush or Spray
Optional Extra Conventional Gravity Spray gun.
For only £25.00 ( + vat) extra add a spray gun capable of spraying this high build Epoxy coating.
Operating pressure 50 - 80 psi
Requires 9-12 cfm depending on set up.
Floor pans inside or out
Roll bars etc.
Can be applied over well adhered old coatings in good condition.
More information is available on the products dedicated pages.
You don't need to have a PayPal account to check out.
Simply select to your Credit/Debit and make payment with your card as normal.
Rustbuster is a registered trade mark of Rustbuster Ltd, registered in the UK Trademark number 2211446 Class 02 & 37.
Any unlawful use of the Rustbuster name or logo or passing off will result in legal proceedings. Rustbuster Ltd UK registerered 3639350.