RUSTBUSTER BODY PANEL RUST REPAIR KIT

RUSTBUSTER BODY PANEL RUST REPAIR KIT


RUSTBUSTER BODY PANEL RUST REPAIR KIT  - Rustbuster

More Images



RUSTBUSTER BODY PANEL RUST REPAIR KIT £40.50 ex VAT In Stock


Free Delivery

On orders over £90.00+VAT, up to 20Kg.



Need Assistance?

For more product information or have general question, please contact us.


Already Purchased This Product? Leave a Review

Share This Product



Product Information


RUSTBUSTER BODY PANEL RUST REPAIR KIT

Kit contains,

  • 250ml Chlor-X Salt remover spray
  • 250ml Safer De-Greaser Spray
  • 250ml Fe-123 rust converter
  • 250ml Pre Paint Panel Wipe
  • 600ml Custom 421 Grey pure epoxy primer
  • 1” Brush
  • 5” Brush
  • 2x Mixing cups
  • Paint stirrer
  • Rustbuster Sanding Disc Set (Drill shank, backing pad and soft foam buffering pad, 4x80,4x180,4x320, 4x600 discs)

 

  1. Wash down the vehicle’s paint work using Rustbuster Chlor-X salt remover and Rustbuster Safer Degreaser.

  2. Open up the paint blister with the 80 grit sanding disc attached to your drill, being careful not to damage too much of the good surrounding paint. This will reveal the extent of the rust.

  3. If the steel’s surface has been perforated, you may need to consider welding in a patch or replacing the panel, assuming that the steel is not perforated proceed to step 4.

  4. Remove all the rust and old failed paint back to a sound steel surface. Use abrasive discs 180-320 to ‘feather edge’ the good paint with the bare metal.

  5. If there is still some rust pitting deep in the steel you may want to consider the use of Rustbuster Fe-123 Rust Converter. Apply to the steel surface very lightly, working the solution deep into the steel. Overlap the edges of good paint by only a millimetre or so: focus the Fe-123 on the rust, not the paintwork. When the Fe-123 has fully reacted with the oxides it will turn black. Read our guide to using Fe-123 Rust Converter for more information about this process.

  6. When the treated areas have fully cured (hard black) lightly sand to remove any nibs, and ideally give the area to be painted a final clean with Pre-Paint Panel Wipe.

  7. Apply a coat of Rustbuster Custom 421 Epoxy Body Primer. This can be rubbed down when dry to the level of the existing paint using the 320 – 600 abrasive discs. Further coats and/or filler can be applied over the Custom 421 where necessary and sanded until you have achieved a smooth surface.

  8. Once your preparation is complete, the area is now ready to take a coat or two of your body colour to complete the repair.

Payment - Safe and Secure



PayPal Logo

You don't need to have a PayPal account to check out.

Simply select to your Credit/Debit and make payment with your card as normal.


Share This Product



Contact Rust


Rustbuster Ltd
Welland House
Cradge Bank
Spalding
South Lincolnshire
England
PE11 3AN

01775 761 222

sales@rust.co.uk

Social Media



Rustbuster is a registered trade mark of Rustbuster Ltd, registered in the UK Trademark number 2211446 Class 02 & 37.
Any unlawful use of the Rustbuster name or logo or passing off will result in legal proceedings. Rustbuster Ltd UK registerered 3639350.