PHOS-KLEEN A – HYDROCHLORIC BLEND RUST REMOVER
Rustbuster Phos-Kleen A is an industrial-strength rust remover designed for commercial use only, containing a blend of hydrochloric and phosphoric acids. It is especially fast acting and will rapidly remove rust from steel, returning the steel to white metal.
Steel items should not be left unattended in Phos-Kleen A for long periods as the acid is strong enough to remove good metal once the rust is gone. We do not recommend Phos-Kleen A for cleaning out petrol or diesel tanks. Once dry neutralise Phos-Kleen A with Rustbuster Chlor-X solution or fresh water.
IMPORTANT: THIS IS AN INDUSTRIAL USE PRODUCT AND PERSONAL PROTECTIVE EQUIPMENT IS REQUIRED.
This product is designated for industrial use only. If you are unsure about use then please contact us before buying. You will require all of the related personal protection equipment listed as related products at the foot of this page. This product will put holes in clothing, so never use it without protection.
| Product description | Rust remover with a blend of hydrochloric and phosphoric acid for industrial use only. |
| Directions of Use | Apply to surface rust by brush. Once applied, the Phos-Kleen A will react with the surface rust and fizz on the surface, rapidly removing rust and mill scale from steel.
Items left to soak in Phos-Kleen A should be watched at all times. Phos-Kleen A will eat rust AND clean metal. Neutralise Phos-Kleen A with Chlor-X Salt Remover (direct to surface formula) or fresh water. |
| Cleaning | Brushes and equipment used can be washed clean in fresh water. However, once used in Phos-Kleen A we would not recommend using these brushes with any other liquid/paint. |
| Safety | Wear suitable protective clothing, apron, gloves, mask, eye and face protection. This product is for industrial use only. |
| Material Safety Data Sheet | Click Here |
| Technical Data Sheet | Click Here |
