CHASSIS RESTORATION VALUE PACK IN BUFF

This kit contains products for the restoration of all underbody and components that require a super durable hard wearing coating.

Enough to coat up to 10m2 of steel at a thickness of over 125um that's twice as thick as competitors chassis coatings, will resist rust and stone chipping. Now available in 12 colours. Select colour from the drop down menu under the product basket before checking out. Non selected colours will be delivered in the default black. See PDF colour card at the bottom of the page.

New option you can now add a quality 1.8.mm Gravity spray gun LVLP Kit

Contents and product description.

1 Ltr RUSTBUSTER Chlor-X DTS Salt remover

Spray this solution direct from the trigger spray bottle onto the area to be treated PRIOR to using the SP10 Cleaner

Chlor-X will lift residual surface salts and allow them to be completely removed. Apply to the steel leave for 5-10 minutes and then wash down with the SP10 Pre paint prep.

1 ltr RUSTBUSTER SP10 Pre-Paint prep

Extra strong concentrated caustic detergent, can be used neat or diluted 4 parts water to one part SP10.

De greases metal leaving a ready to paint surface.

Contains an anti rusting agent.

Use with a strong bristle brush working into the steel before washing off.

You now have a grease free surface ready to wire brush clean.

500 ml Rustbuster Fe-123

This Rust converter stabiliser can be applied direct to steel that either still has rust present or previously rusted steel that you have wire brushed clean but still contains rust pitting. This product does not require neutralising.

2.25 Ltr Rustbuster Epoxy Mastic EM121 Covers 10 m2

High build chassis restoration Epoxy coating.

Use as a primer finish, can be applied over Fe-123 or direct to the steel.

Forms a high build super barrier against further rust and corrosion.

Easy 2k 1:1 mix ratio.

Apply by brush or Spray

Optional Extra Conventional Gravity Spray gun.

For only £25.00 ( + vat) extra add a spray gun capable of spraying this high build Epoxy coating.

Operating pressure 50 - 80 psi

Requires 9-12 cfm depending on set up.

Suitable for

Chassis rails

Sub frames

Suspension

Floor pans inside or out

Wheel arches

Roll bars etc.

Can be applied over well adhered old coatings in good condition.

More information is available on the products dedicated pages.

Downloads and Media

Epoxy EM121 RAL Colour Card