CHASSIS RESTORATION PACK IN BRIGHT RED
This kit contains products for the restoration of all underbody and components that require a super durable hard-wearing coating.
Enough to coat up to 10m2 of steel at a thickness of over 125um that's twice as thick as competitor’s chassis coatings, will resist rust and stone chipping. Now available in 12 colours. Non-selected colours will be delivered in the default black. See PDF colour card at the bottom of the page.
A new option for 2019 is the addition of the LVLP Spray Gun kit, this kit come with a 1.3mm and 1.80mm spray set ups, this fantastic gun operates at very low air consumption of between 4.2 – 6 CFM.
If you would like this gun adding to your order, please click the option above with the LVLP Gravity Gun.
1 Ltr RUSTBUSTER Chlor-X DTS Salt remover
Spray this solution direct from the trigger spray bottle onto the area to be treated PRIOR to using the SP10 Cleaner
Chlor-X will lift residual surface salts and allow them to be completely removed. Apply to the steel leave for 5-10 minutes and then wash down with the SP10 Pre paint prep.
1 Ltr RUSTBUSTER SP10 Pre-Paint prep
Extra strong concentrated caustic detergent, can be used neat or diluted 4 parts water to one part SP10.
De greases metal leaving a ready to paint surface.
Contains an anti rusting agent.
Use with a strong bristle brush working into the steel before washing off.
You now have a grease free surface ready to wire brush clean.
500 ml Rustbuster Fe-123
This Rust converter stabiliser can be applied direct to steel that either still has rust present or previously rusted steel that you have wire brushed clean but still contains rust pitting. This product does not require neutralising.
2.25 Ltr Rustbuster EM121 Epoxy Chassis Pack Covers 10 m2
High build chassis restoration Epoxy coating.
Use as a primer finish, can be applied over Fe-123 or direct to the steel.
Forms a high build super barrier against further rust and corrosion.
Easy 2k 1:1 mix ratio.
Apply by brush or Spray
Floor pans inside or out
Roll bars etc.
Can be applied over well adhered old coatings in good condition.
More information is available on the products dedicated pages.
Downloads and Media
Epoxy EM121 RAL Colour Card