Surface Preparation

 

The surface preparation of steel is determined by the amount of surface contaminates left behind. For instance, blast cleaning a surface to SA3 is regarded as the highest level of preparation on steel due to the fact that the metal is left bright clean with no oxides present, the table below will give you a guide to use when deciding the level of blast preparation required.

 

Blast Cleaning Standard – Most thorough to least

 

 

White Metal

SA3, Nace 1, SSPC5

White Metal - Visible mill scale, rust and foreign particles are entirely removed. The cleaned surface should have a uniform metallic colour but may show varying shades of grey when viewed at different angles.

Near White Metal

SA2.5, Nace 2, SSPC10

Near White Metal - Mill scale, rust and foreign particles are removed to the extent that only traces remain in the form of spots or stripes. The cleaned surface will show varying shades of grey.

Commercial Blast Cleaning

SA2, Nace 3, SSPC6

Commercial - Mill scale, rust and foreign particles are substantially removed, and grey metal is visible.

Brush Off

SA1, Nace 4, SSPC7

Brush Off - Loose mill scale, loose rust and foreign particles are removed.

 

 

Of course, not every project is going to be blast cleaned and there are a number of tools that can be used manually to remove surface contaminates

The table below relates to non-blasting cleaning preparation,

 

Manual Cleaning Standard – Most thorough to least

 

 

Power Tool Cleaning

ST3

Thorough cleaning done using power tools, after which there will be a more pronounced metallic sheen.

Hand Tool Cleaning

ST2

The surface may still show signs of corrosion after cleaning to this standard BUT there will be no loose rust and there should be a faint metallic sheen

 

Rustbuster supply many different powered and non-powered tolls for the preparation of surfaces and these can be found by click here

For most DIY restorers, mechanical rust removal will involve the use of one or more of these:

 

Chemical rust removal

Even after the most thorough mechanical rust removal, a chemical treatment may be needed to tackle minute traces of rust that can remain in the metal. Chemical treatments may also be used as a standalone alternative to mechanical removal.

Chemical rust removers are available in acid-based and non-acid formulas. So, which is likely to be right for you?

Our general advice is to start with non-acid rust removers such as Rustbuster’s Safer Rust Remover if you are new to the use of chemical removers. This tends to work slower than acid-based products, but the upside is that it is non-corrosive, so it removes the risk of damaging the metal once the rust is removed. Mixed-material components can also be treated as Safer Rust Remover won’t damage rubber or gasket material. Residue is easily washed off after use with water.

Acid-based products require greater care during application but can give quicker results. Rustbuster’s Phos-Kleen A Rust Remover is designed for commercial use, although it can be used by the DIY enthusiast as long as our strict safety standards are followed. But beware: this product works fast, and metal treated with it should not be left unattended. Once the desired level of rust removal has been achieved, the metal should ideally be neutralised with Chlor-X DTS.

To stress how powerful Phos-Kleen A really is, please think of it as a ‘metal remover’. It doesn’t differentiate between rusty and good metal BUT it will remove rust first, as it starts from the surface down. If left long enough, it could dissolve your car!

GET THE LATEST NEWS AND OFFERS




Information


Blog

Contact Us

Sitemap

Contact Rust


Rustbuster Ltd
Welland House
Cradge Bank
Spalding
South Linconshire
England
PE11 3AN

01775 761 222

sales@rust.co.uk

Social Media



Rustbuster is a registered trade mark of Rustbuster Ltd, registered in the UK Trademark number 2211446 Class 02 & 37.
Any unlawful use of the Rustbuster name or logo or passing off will result in legal proceedings. Rustbuster Ltd UK registerered 3639350.