SALT REMOVING TECHNOLOGY
We live on an Island where salt contamination is inevitable from atmosphere and highway maintenance use
CHLOR-X as part of your weekly wash routine.
Dry salt crystals cling so well to the surface of steel that the treatment has to be able to get behind the salt to lift
it from the steels surface. Power washing alone cannot do this. A sample coupon of salt contaminated steel boiled
for one hour in water will only remove 90% of contaminant salt, it is this hard crystallised salt that requires a
special surface surfactant to get behind the crystal and lift it from the surface our formula achieves this at a
molecular level not previously available on the UK market. CHLOR-X will also remove salts from concrete and most
other substrates.
Why is salt removal so important ?
You may have had this experience with a salt contaminated surface
If you use a hydrochloric acid solution to remove rust from the steels surface you will find that the rust is removed
back to clean steel very quickly but within a few hours the surface is rusting quicker than before, why? The dried
surface salts from the hydrochloric acid (chlorides) are literally sucking water out of the air towards the steels
surface creating the perfect rust cell. The use of CHLOR-X would prevent this from happening because it gets
beneath the surface salts so they are easily removed when neutralising.
If you happened to paint over these salt crystals then the salt will actually be sucking water through the paint
coating before your paint is even dry. Yes it?s on a molecular level but it is an active rust cell no matter how small.
These surface salts not only encourage rust but prevent paint film adhesion you know the scenario a bit of paint
bubbling and inside is a load of rust, must have come from the other side of the steel......not really, it?s much
more likely to have come from a badly prepared surface.
Salt contamination is the number one enemy in rust prevention, and it can be prevented by using Rustbuster
CHLOR-X
Use Rustbuster CHLOR-X
1. Before shot blast or soda media cleaning.
2. After degreasing and before use of surface prep tools.
3. In your regular weekly car wash to remove road salts from vehicles used in winter prior to wash and wax
4. For general maintenance and rust prevention on plant machinery
5. Highway maintenance machinary
6. As an engine flush in marine engines
Available with unique hose end dispenser that metres the Chlor-X at the required ration via a hozelock type of
snap fitting
750ml 30:1 concentrate in hose end dispenser
750 ml Hose end dispenser only (empty)
750ml ready to use formula
5 ltr ready to use formula
5 ltrs 30:1 concentrate
5 ltrs 30:1 concentrate and hose end dispensor
5 ltr 100:1 Pressure wash concentrate
20ltr 100:1 Pressure wash concentrate
1000 ltr 100:1 Pressure wash concentrate
Pump up dispenser
|
|
