The MBX Surface preparation system is the world leader in wire brush surface preparation. Available in either Pneumatic or electric operation. The MBX system is different from any other surface preparation in that its flexible belts are inserted loosely into a cage like adaptor system. The centrifugal force created by rotation causes the belt to tighten and work as if suspended on an air cushion. The vibration of the bristles when striking the surface is adsorbed by the air cushion. The bristles re-strike the target surface at rest without vibration. This achieves the maximum kinetic energy.
MBX does not develop heat.
MBX does not grind away any good surface material, it will remove only the rust or paint.
MBX will work on contoured areas and into seams and crevices.
MBX bristles strike the target twice per rotation for optimum surface preparation. MBX bristles have a Rockwell hardness of 68 RC for long life operation. MBX bristles can be re sharpened on a grind stone. MBX REMOVES * RUST * PAINT * UNDERBODY COATINGS * STONE CHIP * SOUND DEADENER * SEAM SEALER * all back to sound steel with a suitable surface profile for painting. MBX Kits are supplied with 3 x 23mm belts and 1 x 23mm belt hub. For more accessories go to our MBX accessories page.
For SA 2.5/NACE No2/SSPC-SP-10 and Blast cleaning anchor profiles go to MBX Industrial Bristle Blasting tools page.
RPM: 3500 rpm
Air pressure connection thread: Rp 1/4"
Required hose diameter: 3/8" ID (9.5 mm)
Required flow pressure: 6.2 bar/90 psi
Average air consumption: 17.5 CFM (500 l/min.)
Vibration: 1 m/sec2 (EN ISO 8662-1; 8662-4)
Sound pressure level: 83 dB (DIN 45635-21; ISO 3744)
Weight: 2.40 lbs
Telephone Orders: 01775 761 222
£395.94 Inc VAT
(£329.95 (Outside EU)ex VAT)