MBX Auto Blaster Pneumatic Surface Preparation System
Removes Rust Sealant Undercoating Paint Gaskets and more in open and tight Areas
The MBX Die Blaster with it's patented Accelerator Bar was specially designed to remove corrosion in tight areas such as door rabbets, roof joints, wheel housings and to create a 'blasted surface' for superior adhesion.
The patented Air Cooling system extends the life of each MBX Die Blaster belt. The low speed of 2,600 rpm and the light and compact design of 2.4 lbs ensure a high degree work safety and an easy, flexible handling. The MBX protection guard can be adjusted due to suit the task and the MBX Accelerator Bar can be easily removed for surface preparation in hard to reach areas.
The MBX Die Blaster system reduces surface preparation time and delivers superior performance.
Remove undercoating, chip guard and sealers in seconds
Easily strips rust and paint to pore depth in seconds
Work in tight spaces, corners, contours, uneven surfaces - areas other tools can't reach
Rapidly remove gasket material and adhesives - no clogging of bristles
Create course sandblast, light sandblast or smooth finish as desired
Use the Eraser Wheel to strip vinyl from vehicle surfaces without paint damage
The drive unit powers flexible belts inserted loosely in an adapter systems, centrifugal force spins belt outward against the adapter, creating an air cushion under the belt. This air cushion absorbs vibration, creates flexibility on the surface and maximizes kinetic energy as the bristles strike the surface
Rapidly removes corrosion and oxidation-both hard and soft material
Performs on uneven surfaces
Highly flexible in tight, uneven areas
No clogging or gumming of bristles
No grinding or removal of healthy material
Efficient cutting action-creates angular profile
Easily feathers into existing coatings
Cleans surface evenly
Full visibility of work surface
No heat development, no toxic fumes
Long performance life and low cost of operation
High safety level
Tool Weight: 2.40 lbs
Required flow pressure: 75 psi (5.2 bar)
Average air consumption: 14.2 CFM (400 l/min.)
Vibration: 1.45 m/sec2 (EN ISO 8662-1; 8662-4)
Sound pressure level: 84 dB (DIN 45635-21; ISO 3744)
Air pressure connection thread: 1/4"
Required hose diameter: 3/8"
MBX Die Blaster
11mm coarse left-hand side
11mm coarse right-hand side
11mm coarse straight
For a product brochure go to our Data sheet section
For SA 2.5/NACE No2/SSPC-SP-10 and Blast cleaning anchor profiles go to MBX Industrial Bristle Blasting tools page.
Telephone Orders: 01775 761 222
£395.94 Inc VAT
(£329.95 (Outside EU)ex VAT)