How to rust proofrust proofing carsHow to stop rustRust proofing paintWaxoylEpoxy rust proofingjenolite, Fertan Rust converters. How to prevent rustData SheetsRust remover
Rust proofing
Surface Preparation - Rust RemovalRust ConvertersEpoxy Rust ProofingSilka ProductsDinitrol Rust PreventionVehicle BodyworkSpeciality Rust Products, Tank Seal & CleanerRust Proofing Tools & EquipmentWaxoyl - Rust Proofing WaxRust Proofing Service
Rustbuster Home
Epoxy Mastic

"It gave the best anti-corrosion results with no visible signs of rusting along the panel or the score mark - tough enough for a stand alone chassis coating" - OnTest Vedict in Practical Classics March 2007
Epoxy Mastic is a high build, high solids two pack (has a base and hardener) Epoxy paint coating for the renovation and protection of rusting and pitted steel exposed to severe environments. Epoxy Mastic can be applied successfully over wire brush cleaned steel and still offers the same exceptional performance as coatings applied over blast cleaned steel.

Epoxy Mastic will not flake, peel or blister - even under water. Resists oils, salt water and mechanical damage. Tough penetrating coating that is more flexible than the steel itself. Has six times the penetration and adhesion of single pack products. Does not contain any harmful isocyanates.

So how does it work?
Epoxy Mastic is a two component Epoxy paint composed of nanoscale corrosion protective pigments in short chain molecules with very low surface tension.
This allows the paint to flow into all of the pits and troughs on the steel's surface, ensuring a tough penetrating primary bond.
This is the best kind of bond you can get with a paint finish.The high build epoxy forms a super strong protective barrier over the corrosion inhibiting pigments that hug the steels surface Excellent penetration and adhesion within a high build coating equals exceptional mechanical strength.

Why can't other paints do this?
Single pack paints (paint without hardener) used to protect steel against rust are the most common products. These products have standard sized pigments bound in long chain molecules and as such tend to lay over the pits and troughs on the steel's surface because of their high surface tension, the larger pigments are not able to collect to form a tight pigment matrix. This allows voids to form beneath the paint's surface,the thin film of the coating is not able to offer sufficient barrier protection over the high points on the steels profile, rust pockets form in the voids, the paint blisters and moves onto the next void and so on. The system flakes, peels and blisters.
This scenario cannot happen with Epoxy Mastic using a primary bond. They also tend to have less solid content. This means that the peaks on the steel's profile are soon exposed to the atmosphere and once again rust forms in the void and the system breaks down. Epoxy- Mastic's high solids content of 83% means that the finished dry film thickness is on average 30% thicker than the best single pack paints available.
 Epoxy Mastic


What is the finish like?
Epoxy Mastic can be brush or spray applied like any other paint. It is supplied with Epoxy thinners to reduce viscosity when painting smaller components. It can be painted over or left alone.
It really is the complete answer, a high performance paint finish that has no equal.

Epoxy Mastic
EPOXY-MASTIC
The Epoxy-Mastic systems below are supplied as complete packs including base, hardener and thinners.

Click Here for our colour chart
Epoxy Mastic
Steel Renovation Paint		 Prod.No:
  Product No
Starter Pack BLACK (5m 2) 1ltr - £25.95  25.95
Chassis pack BLACK (10m 2) 2 ltr - £45.95  45.95
5 ltr Pack BLACK - £89.00  89.00
10 ltr Pack BLACK - £170.00  170.00
Starter Pack Grey - £25.95  25.95
Starter Pack Oxide Red - £25.95  25.95
Starter Pack Buff - £25.95  25.95
Starter Pack Aluminium - £25.95  25.95
Starter Pack Green - £25.95  25.95
Chassis Pack Grey - £45.95  45.95
Chassis Pack Oxide Red - £45.95  45.95
Chassis Pack Buff - £45.95  45.95
Chassis Pack Aluminium - £45.95  45.95
Chassis Pack Green - £45.95  45.95
5 ltr Grey - £89.00  89.00
5 ltr Oxide Red - £89.00  89.00
5 ltr Buff - £89.00  89.00
5 ltr Aluminium - £89.00  89.00
5 ltr Green - £89.00  89.00
10 ltr Grey - £170.00  170.00
10 ltr Oxide Red - £170.00  170.00
10 ltr Buff - £170.00  170.00
10 ltr Alumininium - £170.00  170.00
10 ltr Green - £170.00  170.00
250ML No 17 Thinners - £3.95  3.95
1 ltr No17 Thinners - £13.95  13.95
5 ltr No17 thinners - £34.95  34.95
PLEASE PLACE YOUR ORDER BY CLICKING ON "MORE INFO" THEN CLICKING THE "ADD TO BASKET" BUTTON.
WE ACCEPT ALL MAJOR CREDIT/DEBIT CARDS

DELIVERY WILL NORMALLY BE 48 HOURS FOR ALL ORDERS PLACED BEFORE 12AM MONDAY-THURSDAY. DELIVERY ON SATURDAY IS CHARGED AS EXTRA
Web Design Birmingham | Birmingham Web Design | Freecom.net